[Tutorial] Bypass Win7,8,10 Admin Log In with a USB

View previous topic View next topic Go down

[Tutorial] Bypass Win7,8,10 Admin Log In with a USB

Post by cexuslothus on Wed May 25, 2016 1:29 am

Welcome to my tutorial! I'm going to be showing you a way to bypass a administrator login on a Windows 7,8,10 computer.

All that you will need is a USB and Kon-Boot, which can be easily found online.

Step 1: Download the zip folder containing Kon-Boot and extract it to wherever you please.
[You must be registered and logged in to see this image.]

Step 2:
Open the extracted folder and you should see:
[You must be registered and logged in to see this image.]

open up 'kon-bootUSB'

Step 3: Plug in your USB and run 'usb_install_RUNASADMIN.bat' as a Administrator. (Make sure you run it as a administrator!)

The file should look something like:
[You must be registered and logged in to see this image.]

Step 4: You will get a pop up saying:
[You must be registered and logged in to see this image.]

(Make sure that only the USB on which you want to install the bypass on is plugged in.)
Click ok.

Step 5: Verify that the USB is the correct one plugged in and click OK.

[You must be registered and logged in to see this image.]

After clicking OK a message should appear saying that your USB is ready.

[You must be registered and logged in to see this image.]

Step 6: Now you can go to your targeted machine and plug the USB in.
Shut the targeted machine down and power it up with the USB plugged in.

Step 6: As the computer turns on hit the F1 or F2 key depending on how your computer is configured to enter its BIOS.

Step 7:
Navigate to the boot settings and change that the computer boots off the USB flash drive.

BIOS looks something like this depending on your machine.

[You must be registered and logged in to see this image.]

Step 8: Save the changes and exit out of BIOS.

Step 9: Let the computer boot and if everything is done correctly you should get this screen:

[You must be registered and logged in to see this image.]

after a second or so on that screen it will ask you if you want to boot

Kon-Boot
or
Kon-Boot (Old)

Make sure that Kon-Boot is selected and hit enter.

Step 10: The computer should then boot normally and bring you to the log in screen.

[You must be registered and logged in to see this image.]

Select the admin user and instead of typing a password leave the password box blank and hit Enter.


Conclusion:
If everything works well you should now be in the administrative account!, Please use this legally and use common sense.

cexuslothus
Active User
Active User

Posts : 16
Points : 22

Back to top Go down

Re: [Tutorial] Bypass Win7,8,10 Admin Log In with a USB

Post by everfresh on Wed Jun 15, 2016 12:08 am

Thanks bro

everfresh

Posts : 4
Points : 4

Back to top Go down

Re: [Tutorial] Bypass Win7,8,10 Admin Log In with a USB

Post by CWXSwagzsx on Sun Aug 14, 2016 7:02 am

Nice

CWXSwagzsx

Posts : 5
Points : 7

Back to top Go down

Re: [Tutorial] Bypass Win7,8,10 Admin Log In with a USB

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum